- raise and secure the car, while hanging the front wheels;
Pic. 6.23. Front anti-roll bar mount: 1 - nut, 36 Nm; 2 - nut, 104 Nm; 3 - clamp
- remove nuts 1 (pic. 6.23) fastening of traction to the anti-roll bar;
- unscrew nuts 2 and remove clip 3 (see fig. 6.23) mounting stabilizer bar;
- remove the stabilizer from the car;
- remove the rubber pads from the stabilizer.
To install the front anti-roll bar:
Pic. 6.24. Fastening elements and the location of the pillows on the front anti-roll bar: 1 - clamp; 2 - pillow; A - two flats for positioning the pillow; B - rectangular marks on the stabilizer
- install pillows on the stabilizer (pic. 6.24), aligning the inner flats A on the cushion with the marks B on the anti-roll bar (one on each side). The anti-roll bar is hinged with two elastic cushions 2;
Pic. 6.25. Correct Clamp Orientation (1) when placed on a cushion (2) anti-roll bar
- install clamps 2 on cushions 1 (pic. 6.25);
- install the anti-roll bar on the vehicle in such a way that the element that excludes incorrect installation is located on the right;
- installation is carried out in the reverse order of removal;
- tighten the nuts to the required torque.