Figure 6.42. Adjusting the front suspension of the car: 1 - belt; 2 - rings; 3 - screw mechanism for compressing springs; 4 - crossbar
- hook straps 1 with rings 4 (figure 6.42) for the engine subframe;
- secure the crossbar 2 with screw mechanisms 3 for compressing the springs under the lift platforms;
- secure the rings to the shaft of the screw mechanism for compressing the springs 3;
- adjust the length and position of the belts so that they occupy the most vertical position when they are tensioned;
Article based on material from the website peugeotbook.ru
Figure 6.43. Measuring the average position of the front suspension: H1 - middle position of the suspension; 1 - measuring instrument; A - body edge
- by rotating the shaft of the screw mechanism for compressing the springs, compress the suspension springs so that the settlement of the car body on both the left and right sides is H1 (middle suspension position) between the edge of the body A (figure 6.43) and the platform floor.