AB does not require maintenance during the entire service life.
The normal electrolyte level is 5 mm above the plates, which corresponds to the mark «MAX» on the outside of the AB. To restore the electrolyte level, add only distilled water.
A more detailed description of the AB is given in the section «electrical equipment».
Warnings! During the operation of the AB, it is prohibited:
- disconnect the wires from the battery when the engine is running;
- recharge the battery with connected wires of the car's bot network;
- start the engine immediately after connecting the battery, make a 10-15 second exposure;
- if there are malfunctions in the operation of electrical equipment after installing the battery, troubleshoot yourself, contact the service station.
Energy saving mode
From the moment the engine is turned off, it is recommended to use battery energy for no more than 30 minutes, so as not to cause its discharge. After this time, the display shows the message «Power saving mode enabled» - lighting, radio and other auxiliary consumers of electricity are turned off to ensure reliable engine start from the battery.