Tailgate Replacement (station wagon) (Peugeot 207)

Remove the additional brake light (see section "Electrical equipment").

Partially disassemble the tailgate (see below).

Move the electrical wiring harness to the side.

Lock the castle.

Disconnect the shock absorbers (2) of the tailgate (1).

Loosen the bolts (3) and remove the tailgate (1).



Install the parts in reverse order.

Adjustment

Pre-tighten the bolts (3).

Adjust the gaps and align with the bolts (3) and the tailgate stops in zone "a", "b", "c" and "d" (see the corresponding operation).



If necessary, in addition to adjusting the tailgate, you can adjust its hinges.

Open the tailgate and tighten the bolts (3) to 15 Nm.

Check the functioning of electrical equipment.