Remove the trunk sill trim (see below).
Turn away bolts (1) and remove the lock (2).
Install the parts in reverse order.
Adjustment
Note. To adjust the lock bracket, remove the guides (4), by releasing the mounts (3) (with a thin screwdriver).
Install the lock bracket (2) to the highest position.
Tighten and loosen ¼ turn bolts (1).
Install the trunk seal.
Close the tailgate.
Perform clearance adjustment and alignment.
Open the tailgate.
Tighten the bolts (1) torque 8 Nm. Reinstall trunk opening trim (depending on configuration).
Check the functionality of the electrical equipment.