Remove:
- additional brake light;
- wiper blade;
- register sign.
Detach trim panels (1) tailgate pillars (in the zone «A»).
Remove trim panels (1).
Disconnect the tailgate trim panels (2) (in the zone «IN»). Remove tailgate trim (2).
Disconnect connector (3) from the wiper motor (4).
Unlock and pull the fastener at the same time (5) (using a screwdriver in the direction of the arrows «C-D»).
Repeat this operation for other fasteners.
Turn Wiper Motor (4) (in the direction of the arrow «E»).
Move and remove the wiper motor (4).
Disconnect:
- connector (6) handles for opening the tailgate;
- license plate light connectors (7).
Remove fasteners (8) (decorative element of the registration plate light (10).
Release the latches (9) and remove the decorative element of the registration plate light.
Unclip the license plate lights (11) (in the zone «F») and remove.
Remove fasteners (12) tailgate lock (13).
Remove tailgate lock (13).
Disconnect connector (14).
Disconnect connectors (15) rear window heater (16) (from each side).
Remove wiring harnesses (17) through holes in the zone «G».
Take off the glass (18) and tailgate.
Install the parts in reverse order.
Tighten fasteners (12) torque 8 Nm.