Replacing the high beam lamp (Peugeot 207)

Remove the protective plastic cover by pulling on the latch tab.

Disconnect the electrical harness connector from the lamp.

Squeeze the spring clips to release the lamp.

Remove the lamp and replace it. Reinstallation is carried out in the reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article reviewed by editor: Matveev Demid

Share information:

Peugeot 207: Car care

Replacing the low beam lamp
Replacing the bulb in the direction indicators
Replacing headlight bulbs
Maintenance of fuses
Starting the engine with an additional battery

Replacement of daytime running lights, parking lights
Replacing the side turn signal repeater assembly with the lamp
Replacing the rear lights
Car handling and tires
Wheel reinstallation

See similar information for other Peugeot models

➨ Headlight beam alignment — general information Peugeot 106 (1991-2003)
➨ Low beam/high beam electrical circuit, without low beam relay Peugeot 306 (1993-2002)
➨ Coolant Temperature High Lamp Sensor Peugeot 406 (1995-2004)
➨ Scheme 11. High and low beam headlights Peugeot 605 (1989-2000)
➨ High and low beam Peugeot 806 (1994-2002)

Link to this article in different formats

TEXTHTMLBB Code

Comments and feedback from visitors