Replacing the side turn signal repeater assembly with the lamp (Peugeot 207)

Use a screwdriver to pry up the repeater, inserting it halfway between it and the base of the mirror.

Using a screwdriver as a lever, remove the repeater assembly.

Disconnect the wiring connector from the repeater.

Installation is carried out in reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article reviewed by editor: Matveev Demid

Share information:

Peugeot 207: Car care

Replacement of daytime running lights, parking lights
Replacing the high beam lamp
Replacing the low beam lamp
Replacing the bulb in the direction indicators
Replacing headlight bulbs

Replacing the rear lights
Car handling and tires
Wheel reinstallation
Tires with tread wear indicator
Tread pattern height

See similar information for other Peugeot models

➨ Checks carried out with the vehicle raised and the wheels free… Peugeot 106 (1991-2003)
➨ Replacing the side airbag Peugeot 307 (2001-2008)
➨ Replacing the heater air intake filter (60,000 km/3 years) Peugeot 405 (1987-1997)
➨ Signal lights Peugeot 605 (1989-2000)
➨ Exterior lighting and turn signal switch Peugeot Partner I (1996-2008)

Link to this article in different formats

TEXTHTMLBB Code

Comments and feedback from visitors