1 - direction indicators (PY 21 W with yellow bulb).
2 - parking lights (W 5 W).
3 - low beam headlights (H7-55W).
4 - high beam headlights (H1-55W).
5 - headlights with course correction (H7-55W).
6 - fog lights (H11-55W).
Note. When replacing the lamp, hold the bulb only through a piece of dry cloth.
The headlight lenses are made of polycarbonate and have a protective coating, therefore it is forbidden to clean them from dirt with a dry cloth or a substance containing an abrasive, as well as using detergents or solvents. Use a soft sponge and soapy water.
In certain weather and climatic conditions (such as low temperature, high humidity, etc.) The brief appearance of condensation on the inside of the headlight lenses should not be a cause for concern: the condensation disappears within a few minutes after switching on the headlights.
If a lamp fails, a message appears on the multifunction display.
Attention. Xenon lamps should only be replaced by a workshop.