Remove the front left fender liner.
Remove deflector (2) and resonator (3).
Unclip the fuse box (1).
Remove the battery tray cover.
Remove the battery.
Disconnect connector (in the zone «A»).
Remove the battery tray (4) and bracket.
Clamp the hoses (5) (in the zone «b») with the help of strands.
Remove clamps (6).
Disconnect the hoses (5).
Remove the bolt (7) and remove the sealing washer (11).
Remove heat exchanger (8).
Remove with subsequent installation of seals (9), (10) below the heat exchanger.
Note. If the heat exchanger is not immediately put back into place, install the guards [3a] and [3b] on the rear card and on the heat exchanger.
Attention. If the gearbox oil has been contaminated, the heat exchanger must be replaced.
Install the parts in reverse order.