Removing
Disconnect the battery.
Remove the decorative cover.
Remove:
- battery;
- wiper arms;
- air filter;
- bolts of the cross member of the lower part of the windshield opening;
- cross member of the lower part of the windshield opening;
- two front guard grille clips;
- guard grille in front of the windshield;
- soundproof screen;
- bottom support (air filter).
Protect the air intake circuit with plugs.
Disconnect connector (5) exhaust gas recirculation valve.
Loosen the fixing nut (6).
Remove clamps (7) EGR system heat exchanger.
Loosen two screws (8) EGR valve.
Remove the EGR valve.
Installation
Make sure there are no foreign objects in the intake system.
Check the air inlet pipe to the turbocharger.
Replace metal seal and clamp (7) (service operation).
Tighten the bolts (8) EGR valve (tightening torque 10 Nm).
Remove the plugs from the intake system.
Install the rest of the parts in reverse order.