Install the power unit in place.
Install in place:
- mounting bolts (19) (tighten to 60 Nm);
- upper right engine mount (18);
- mounting bolts (17) (tighten to 60 Nm);
- mounting bolts (16) (tighten to 60 Nm).
Remove the lift table.
Remove the tools [4], [5]. Install in place:
- clutch hydraulic drive slave cylinder (13);
- mounting bolts (14) (tighten to 30 Nm).
Connect the coolant outlet block hoses.
Proceed with installation operations in the reverse order of removal.
Original text is located at peugeotbook.ru