- drain the fuel from the tank using a pumping unit;
- place the car on a lift, raising the rear wheels;
- remove the rear right wheel;
- remove the mudguard;
Figure 3.99. Fastening the filler neck: 1 - bolts
- unscrew bolts 1 (figure 3.99) fuel tank filler neck fasteners;
Figure 3.100. Removing the fuel tank filler neck: 1, 2 - pipelines; 3 - clamps; A - welding point; B - nipple; X=55 mm; Y=150 mm
- remove clamps 3 (figure 3.100);
- mark pipes 1 and 2;
- cut pipeline 1 at a distance of A=55 mm from the welding point A;
- cut pipeline 2 at a distance of Y=150 mm from fitting B;
- remove the fuel tank filler neck.
Install the filler neck in the reverse order of removal.
Attention! Do not confuse pipelines 1 and 2 during installation.
You can find the original on the resource (PeugeotBook.ru)
Connect the pipelines using quick-release fittings supplied as spare parts.