Table of contents: Removal 🠇 Installation 🠇
Removal
Raise and secure the vehicle with the rear wheels off the ground.
Remove the rear wheel, hub and rear brake disc (see the corresponding operation).
Loosen the bolt (1).
Move the ABS sensor (2).
Loosen the bolts (3).
Remove the rear wheel axle and brake flange (4).
Installation
Install the brake flange (4) and the rear wheel axle.
Original is located at [Peugeotbook.ru]
Install the bolts (3), lubricating them with the compound "Loctite Frenetanch".
Install the ABS sensor (2) and bolt (1), tighten to 8 Nm.
Install the hub, rear brake disc (see the corresponding operation).
Install the rear wheel.