Loosen the clamp (1).
Disconnect the fitting (2).
Remove the air filter assembly (3) and the air duct cover (4).
Drain the cooling system circuit.
Unscrew the bolts (5), the pipe screw (6) and remove the bracket (7).
Disconnect the electrical connector of the coolant temperature sensor (8).
Caution: Do not use tools that could damage the sensor or its mating surface when removing or installing. Replace the sensor if it has been dropped or hit hard.
Do not use the temperature sensor as a support or prop during operation.
Remove the coolant temperature sensor (8).
Disconnect the clamp (9) of the cooling system hose and move aside the tube (10) and hoses (11).
Loosen the bolts (12) of the coolant outlet block.
Move the electrical harness (13).
Remove the coolant outlet block.
