- open the hood;
Pic. 10.46. Location of latches (1) top mount front fender
- remove clips 1 (see fig. 10.46) the upper fastening of the front wing, turning each of them a quarter of a turn;
- open the front door;
Pic. 10.47. Screw location (1) rear mount front fender and direction (A) wing detachment
- remove screws 1 (see fig. 10.47) rear mount of the front fender;
- detach the front fender by moving it away from vehicle A;
Pic. 10.48. Screw location (1) and fixative (2) lower front fender mount
- remove screws 1 (see fig. 10.48) and remove the retainer 2 of the lower fastening of the front fender;
- partially disconnect the side part of the front bumper from the latches and lower it down a little, while not damaging the latches;
Attention! When detaching the front bumper clips, carefully move the bumper.
Pic. 10.51. Screw location (1) and screw (2) headlight mounts
- unscrew screws 1 and screw 2 through the gap between the front fender and the bumper (pic. 10.51) headlight mounts;
- moving the wing in a horizontal plane, adjust the gap between the wing and the front door;
- secure the fender with screws and clips.