Pic. 7.17. Adjustment of a convergence of forward wheels: 1 - tie rod end; 2 - nut
On the car, only the convergence of the front wheels is regulated. Adjust by turning the tips 1 (pic. 7.17) steering rods. One turn equals approximately 2 mm. After adjustment, lock by tightening nut 2 to 45 Nm. The installation angles of the rear wheels are given in table. 7.2.
Table 7.2. Rear wheel alignment
engine's type | HFY, HFZ | HFY, HFZ | KFX | KFX | NFZ |
Tires | 165/70R13 | 175/65R14 | 165/70R13 | 175/65R14 | 165/70R13 |
Height from the floor to the rear point of support under the jack, mm | 118 | 121 | 118 | 121 | 121 |
Camber angle | 1°±30' | ||||
Convergence of forward wheels, mm (hail) | 1,5±0,5 (+0°16'±5') | 1,7±0,5 (+0°16'±5') | 1,5±0,5 (+0°16'±5') | 1,7±0,5 (+0°16'±5') | 1,7±0,5 (+0°16'±5') |