Special fixtures:
1 - spatula 1350;
2 - spatula 1327.
Remove the front bumper.
Headlight washer
Remove the assembly of jets and a decorative element of the headlight washer (from each side).
Release from fasteners (1) and headlight washers (in the zone «A», from each side).
Remove the headlight washer assembly with its tube (2).
Disconnect the headlight washer support (3) (in the zone «IN») and remove.
Front fog lamp
Loosen the screws on each side (4) and remove the front fog lights (5).
Cut or cut the break rollers (in the zone «WITH»).
Remove the front fog lamp support (6).
Emblem
Loosen the screws (7).
Detach the emblem (8) (in the zone «D») and remove.
Front fairings
Disconnect the front bumper fairings (9) (in the zone «E») and remove.
Front bumper side bracket
On each side, cut or cut the break-in rollers with a cutter (in the zone «F»).
Remove the side support of the front bumper (10).
Front bumper trim
Remove the front bumper trim on each side (11) (in the zone «G», with the help of devices [1-2]).
Remove the front bumper cover (11).
Front plate support
Cut or cut the break rollers (in the zone «H», from each side).
Detach the front bumper trim (12) (in the zone «I»).
Detach the front plate support (13) (in the zone «J») and remove.
Bumper grille
Cut off the crimp fasteners of the bumper grille with a cutter or mill (14) (in the zone «TO», from each side).
Detach the front bumper grille (15) (in the zone «L») and remove.
Assembly
Install the parts in reverse order.
Note. Crimp all locking tabs (in zones «C - F - H - K»).