Replacing the clutch cable (Peugeot 306)

After loosening the adjusting nuts on the end of the cable and releasing the cable from the support, move the cable into the car's interior and disconnect the other end of the cable from the mount on the top of the clutch pedal.

Installation is carried out in reverse order.



All rubbing areas of the cable must be lightly lubricated with a universal lubricant. After installing the cable, adjust the clutch pedal as described when installing the clutch.

XU engines have a clutch pedal servo. If there is a problem with the clutch, adjust the clutch using Figure 182:

• Loosen the bolt (1).
• Lift the clutch pedal.
• Tighten the bolt (1) again.
• This design automatically adjusts the clutch as the linings wear out.