- open the sliding and lifting roof panel;
- turn off the ignition and disconnect the ground wire from the battery;
Figure 10.96. Sliding and lifting roof panel deflector: 1 - lever; 2 - deflector plate; A - direction of rotation of the deflector plate
- lower the deflector levers 1 (figure 10.96);
- turn plate 2 in direction A to remove the deflector base from the levers;
- remove the deflector plate;
Figure 10.97. Removing the deflector control rod (1) and the deflector lever (2)
- remove the deflector control rod 1 (figure 10.97) from a nest in the rail;
- remove the deflector lever 2 by pressing it back and pulling it up;
Attention! A new deflector lever must be used during installation.
- remove the deflector lever (1) by pushing it back and pulling it up;
Installation is carried out in the reverse order of removal, taking into account the following:
- perform initiation and training of the lift/slide roof panel positions;
- connect the ground wire to the battery;
- initiate all electronic systems.
(Original can be viewed at: «PeugeotBook.ru»)