- disconnect the ground wire from the battery;
- remove the headlining;
- unscrew the CIELO cassette fastenings at the rear to lower it a few millimetres;
Figure 9.61. Roof antenna connections and fastenings: 1 - electrical connector; 2 - nut; A - electrical connector; B - zone near the base of the antenna
- clean out the foam filler and disconnect the electrical connector A (figure 9.61);
- disconnect electrical connector 1;
- release and route the antenna wires so that they exit in area B near the base of the antenna;
- unscrew nut 2 and remove the antenna.
Installation is carried out in the reverse order of removal, taking into account the following:
- apply foam filler to protect the electrical connector A;
- connect the ground wire to the battery;
- initiate all electronic systems.