- disconnect the ground wire from the battery;
- remove the rear part of the headlining;
Figure 9.56. Sunshade drive: 1 - electrical connector; 2 - electric motor; 3 - screws
- disconnect electrical connector 1 (figure 9.56) from the sunshade drive motor;
- unscrew the 3 mounting screws and remove the motor 2 from the sun blind drive.
Installation is carried out in the reverse order of removal, taking into account the following:
- initiate the sunshade drive by long pressing the switch in the sliding closing direction.
Warning! Re-initiating the node is not possible without disconnecting the power.
Source of the article is website www.peugeotbook.ru