Driver airbag
Set the steering wheel to a horizontal position to access the service hole (in the zone «A»).
Insert a flathead screwdriver and press it to release the module fixing spring (1), by pressing the driver's airbag module (2) .
Pull the driver's airbag up.
Disconnect connectors (4) And (5).
Remove the driver's airbag (3).
Steering wheel
Loosen the fixing bolt (1).
Mark the position of the steering wheel and remove it.
Attention. Do not damage the airbag electrical connector.
Installation
Install the parts in reverse order.
Calibrate the Steering Angle Sensor with a scan tool «Lexia» or «Proxia».