To enable only the vehicle perimeter monitoring feature, do the following:
- turn off the ignition;
Figure 1.2. Location of the anti-theft system button (1)
- no later than 10 seconds have passed, press button 1 (see figure 1.2), the control lamp should light up and remain lit continuously;
- get out of the car;
- turn on the anti-theft system (blocking or complete blocking) using the remote control (the control lamp of button 1 will start flashing every second).
If the anti-theft system is activated but does not respond to the remote control signal, do the following:
- unlock the doors with the key and open the door - a siren will sound;
- within 10 seconds, insert the key into the ignition switch - the siren will turn off.
Serviceability check
If, when the ignition is turned on, the control lamp of button 1 lights up for 10 seconds, this means that the anti-theft system siren is poorly connected.
Contact a Peugeot service station to have the system checked.