Table of contents: Turning on 🠇 Shutdown 🠇
Turning on
Turn off the ignition and exit the vehicle.
Figure 1.2. Location of the anti-theft system button (1)
If no more than 5 minutes have passed since you left the car, turn on the anti-theft system using the remote control while simultaneously blocking or completely blocking the locks (the control lamp of button 1 (figure 1.2) will flash every second).
Note: If you need to lock your vehicle without activating the anti-theft device, simply lock it with the key.
When the anti-theft system is triggered, the siren sounds and all turn signals flash for 30 seconds. After this, the system returns to standby mode, remaining active.
Please note: If the anti-theft system is triggered 10 times in a row, it will not respond on the 11th trigger, as it will become inactive and deactivate.
Note: If the indicator light on button 1 flashes at a rapid rate, the anti-theft system has been activated in your absence.
Shutdown
Unlock the doors using the remote control (the control lamp of button 1 should go out).
Note: If the anti-theft system was activated in your absence, the rapid flashing of the indicator lamp will stop after the ignition is turned on.