Table of contents: Diesel engine DW8 🠇 Petrol engines 🠇
Diesel engine DW8
Remove the generator in the following order:
- disconnect the negative battery cable;
- disconnect the contact connector from the control unit;
- remove the decorative engine cover;
- remove the accessory drive belt;
- disconnect and move the power steering pump away without opening the system circuit;
- disconnect the connectors from the generator;
Figure 10.1. Unscrewing the bolts: 1 - bolts
- unscrew bolts 1 (figure 10.1);
Figure 10.2. Fastening bolt: 1 - bolt
- unscrew bolt 1 (figure 10.2);
Figure 10.3. Fastening bolt: 1 - bolt
- unscrew bolt 1 (figure 10.3);
- remove the generator.
Petrol engines
Remove the generator in the following order:
- disconnect the negative battery cable;
Figure 10.4. Removing the accessory drive belt
- remove the accessory drive belt (figure 10.4);
Figure 10.5. Removing the power steering pump: 1 - pump
- disconnect and move pump 1 (figure 10.5) power steering without opening the system circuit;
Figure 10.6. Removing the generator: 1-pin connector; 2 - roller
- remove video 2 (figure 10.6);
- disconnect the 1 terminal connectors from the generator;
- unscrew the generator mounting bolts;
- remove the generator.
Figure 10.7. Checking the presence of spacers: 1, 3, 4 - bolts; 2 - spacers
Install the generator for both engines in the following order:
Attention! Check for spacers 2 (figure 10.7) on the attachment support bracket before installing the generator in place.
- install a generator;
Attention! Tighten the fasteners to the specified torque, starting with the two fasteners located on the pulley side.
- tighten bolts 4 to 43 Nm;
- tighten bolts 1 and 3 to 30 Nm;
- install the accessory drive belt;
- proceed with installation in the reverse order of removal.