- bearing puller — 0317-JZ, 4508T-J;
- bearing installation tool - 0317-D, 7.101TD.
Disassemble the differential with an internal diameter of 68 mm sphere in the following order:
- disassemble the gearbox as described above;
Figure 6.88. Distinguishing element of the differential: A - protrusion
- remove the primary and secondary shafts and differential from the clutch housing. The differential (68 mm) has protrusions A (figure 6.88);
Figure 6.89. Differential parts (68 mm): 1 - retaining ring; 2 - satellite axis; 3 - satellites; 4 - axle gears; 5 - insert; 6 - differential box
- remove retaining ring 1 (figure 6.89) satellite axes;
- remove the axis of 2 satellites;
- remove satellites 3 by turning them;
- remove the axle gears;
- remove insert 5;
Figure 6.91. Removing the speedometer drive gear: 1 - speedometer drive gear
- remove gear 1 (see figure 6.91) speedometer drive;
- using a tool, remove the tapered bearings.
Disassemble the differential with an internal diameter of 77 mm in the following order:
- disassemble the gearbox as described above;
- remove the primary and secondary shafts and differential from the clutch housing. The differential (77 mm) does not have protrusions A (see figure 6.88);
Figure 6.90. Differential parts (77 mm): 1 - centering sleeve; 2 - satellites; 3 - satellite cups; 4 - axle gears; 5 - differential box; 6 - satellite axis; 7 - retaining ring
- remove retaining ring 7 (figure 6.90);
- remove the 6 satellite axle;
- remove satellites 2 by turning them;
- remove the axle gears 4;
- remove the cups of the 3 satellites;
- remove centering sleeve 1;
- remove gear 1 (see figure 6.91) speedometer drive;
- using a tool, remove the tapered bearings.
Original published on the portal www.peugeotbook.ru
Assemble both differentials in the reverse order of disassembly. When assembling, the removed bearings should be replaced with new ones.