Removal of external parts and gearbox assemblies is carried out in the following order:
Pic. 6.42. Removing the outer parts of the gearbox: 1 - clutch release bearing; 2 - support with speedometer drive gear; 3 - reversing light switch
- remove bearing 1 (pic. 6.42) clutch disengagement;
- place the gearbox on a wooden stand at least 180 mm high;
- remove support 2 from the speedometer drive gear;
- unscrew the drain plug;
- unscrew the oil filler plug;
- unscrew the switch 3 reversing lights;
- remove the axle shaft seals;
Version 1
Pic. 6.43. Shift Ball Lever: 1 - ball joint lever; 2 - jumper; 3 - collar
- remove lever 1 (pic. 6.43) ball bearing;
- remove clamp 3 and jumper 2;
Version 2
Pic. 6.44. Rocker arm of the intermediate lever of the mechanism of a gear change: 1 - rocker
- remove rocker 1 (pic. 6.44) intermediate gearshift.
Installation of external details and knots of a transmission carry out to sequences, return to removal.