Front seats
1. The tubular seat frame is attached to the guides using studs and nuts. The guides are secured to the floor with Allen head screws.
2. To remove the seat, move it all the way forward and unscrew the rear guide screws. Move the seat all the way back and remove the front guide screws.
3. Pull the seat out through the door.
Rear seat (Saloon)
4. Loosen the screw on the front surface of the seat cushion and remove the cushion.
5. Loosen the lower seat back fasteners and remove the back.
6. If there is a center armrest, remove the bolts securing it to the pivot arms.
Back seat (Estate)
7. The rear seat cushion and backrest are removed after removing the bolts from their side pivot structures.
8. All seats are installed in the reverse order of their removal.
Front seat headrests
1. The front seat head restraints are secured with spring clips that secure the head restraint support posts.
2. To adjust the position of the headrests or simply remove them, you need to pull them up sharply. This will release the spring clips from the slots on the headrest support posts.
Source available here PeugeotBook