- disconnect the negative battery cable;
Figure 4.79. Disconnecting the wire from the ground: 1 - wire fastening
- remove mount 1 (figure 4.79) "ground" wires;
- drain the coolant from the cooling system as described above;
- remove the radiator grille;
- remove the water hoses;
- remove the cooling system radiator upwards;
Figure 4.80. Removing the hose: 1 - hose
(Data published on the website: «PeugeotBook.ru»)
- turn hose 1 (figure 4.80) one quarter turn up and remove;
Figure 4.81. Removing the fuse: 1-pin connector; 2 - latch
- remove the high current fuse by pressing the latch 2 (figure 4.81) and disconnected from connector 1;
Figure 4.82. Disconnecting the electric fan motor connector: 1-pin connector
- disconnect pin connector 1 (figure 4.82) electric fan motor;
Figure 4.83. Removing the radiator support: 1 - bolts; 2 - hood lock
- remove lock 2 (figure 4.83) hood;
- unscrew the bolts 1 of the support fastening;
- remove the radiator and engine cooling fan unit support upwards.
Install the radiator support and fan motor unit in the reverse order of removal.
Fill the engine cooling system and bleed air from it.