Recommended fixtures:
1 - 4507-TA flywheel calibration pin;
2a - camshaft retainer 4533-TA.C1;
2b - camshaft retainer 4533-TA.C2.
Characteristics of the timing mechanism
Asterisks
Chain
Timing chain tensioner guide
Disconnect the negative battery terminal.
Remove the oil filter (1).
Start the engine.
Remove:
- right upper engine mount assembly;
- top timing cover.
Remove the spark plugs to make turning the crankshaft easier.
Turn the engine clockwise by the crankshaft gear to the locked position. Install tools 2a and 2b. Fix the flywheel at the control point using tool 1.
Note. If fixing is not possible, re-adjust the timing drive.
Remove pins 1, 2a and 2b.
Install the parts in reverse order.
Connect the negative battery terminal.