27. This operation is not routine and should be carried out separately in case you suspect that the brake band is not adjusted correctly (a sign is changes in engine speed when shifting from third gear to fourth and vice versa), or after removing the tape adjusting screw to eliminate leakage.
28. Raise and support the front of the machine, Find the adjusting screw of the brake band (next to the drain plug of the pallet box).
29. Loosen the locknut of the adjusting screw and tighten it to a torque of 1.0 kg m, and then turn it out exactly 2 turns.
30. Tighten the locknut, being careful not to knock the screw out of position.
31. Lower the car.