XU Series Engines — first run after overhaul (Peugeot 305)

1. See. chapter 1, Section 44, Paragraphs 1-7.

2. Wait at least 2 hours for the engine to cool down. Loosen the bolt securing the right engine support bracket to the cylinder block, and then retighten the cylinder head bolts. When finished, tighten the engine support bracket bolt. No further retightening of the cylinder head bolts is required.

3. Check the valve clearances again.

4. If a new camshaft drive belt is installed, it should be re-tightened as described in the appropriate section.

Source of the article is posted at (www.peugeotbook.ru)