- Never start the engine if the battery terminals are not tightened.
- Never disconnect the battery while the engine is running.
- Be sure to disconnect the battery before charging.
- Never use a battery with a voltage higher than 12 volts to start the engine.
- Never turn off the electronic control unit when the ignition is on.
- Before connecting the connectors, check the condition of the contacts and check the reliability of the contact installation in the connector. On the Bosch connector, check the installation of the retaining spring.
- When carrying out electric welding work, be sure to disconnect the electronic control unit from the on-board network.
- When checking compression, disconnect the electronic control unit connector.
- Do not use a test lamp to check electrical circuits.
Precautions when working with the system (Peugeot 306)
When carrying out work on the engine, if elements of the fuel injection system are affected, the following points should be taken into account:
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Article reviewed by editor: Shirokov Arseny
Share information:
See similar information for other Peugeot models
➨ Air conditioning system — general information and precautions Peugeot 106 (1991-2003)
➨ Precautions when working with automatic transmission Peugeot 207 (2006-2014)
➨ Heating and ventilation system switches Peugeot 405 (1987-1997)
➨ Precautions when working on the fuel system of a diesel engine Peugeot 605 (1989-2000)
➨ Precautions when working on the fuel system of a diesel engine Peugeot 806 (1994-2002)
Link to this article in different formats
Comments and feedback from visitors
No comments yet
- User manual
- Keys, doors and alarm
- Controls and instruments
- Driving and operation
- Maintenance
- Power unit
- Petrol engines TU3 and TU5
- Petrol engines EW10
- Diesel engines DV10
- Diesel engines DW10
- Transmission
- Clutch and drive shafts
- Mechanical gearbox
- Automatic gearbox
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Power devices
- Airbags
- Electrical circuits
- General information
- Introduction to manual
- Specifications
- Gasoline engine
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection
- Ignition system
- Diesel engine
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection
- Transmission
- Clutch
- Gearbox
- Drive shafts
- Chassis, running gear
- Steering system
- Front suspension
- Rear suspension
- Brake system
- Electrical equipment
- Power devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Gasoline engines
- Diesel engines
- Cooling system (gasoline)
- Cooling system (diesel)
- Fuel system (gasoline)
- Fuel system (diesel)
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox BB8
- Mechanical gearbox BE1
- Automatic gearbox ZF4
- Shafts, hubs and wheels
- Chassis, running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits
- Wiring diagrams (diesel)